On the cradle which you removed earlier, there are two metal
plates. Remove these.
 
The Hard Drive :
Remove the Hard Drive from it's packaging (DVD drive pictured below).
Check that it is jumpered for master or cable select on the back. You can usually see
how to do this from a sticker on the drive, else refer to any documentation
that came with the drive. (They usually are master by default) Now
take your hard drive and insert it at the bottom of the cradle, making sure
that the IDE connections are facing inward to the system. Take 4 screws and screw it in tight ( use two each side). Below is a picture of
a hard drive fitted. 
The Floppy Drive : Remove
the floppy drive from it's packaging. ( Floppy drive pictured below) Screw
into system, it's power connectors should face same direction as hard
drive.
The DVD/CD-Drive : For
this we will assume we are working with DVD. Remove the DVD drive from it's
packaging. Now check the drive is jumpered to
master settings. ( You can usually see how to do this from a sticker on the
drive, else refer to any documentation that came with the drive).
Making sure the eject button
will be to the bottom right insert the DVD drive
from the front and using 4 screws, screw the DVD
drive in tight ( use two each side).
Click
here for Build your own Shuttle computer step by step tutorial Part 6
Privacy
policy Link
Exchange Links
page Contact Info
By
using this website you are agreeing to this Disclaimer & Legal statement
|
